Skip to main content
Skip table of contents

Stappenbaak (RWS) - 23

Description

Driver to decode wave height from Marine 300 stappenbaak.
There are two versions of the driver: the first (Stappenbaak (RWS)) will decode the electrode value and multiply it with 5 cm to get the NAP height. This driver assumes that the bottom of the "baak" is positioned at 0.00 NAP.
The second version (Stappenbaak (RWS, User NAP file)) will look up the decode electrode in a user defined file. The file should be called DrvStappenbaak.txt and should have the following format:

;Configuration file for RWS Stappenbaak
;Filename: DrvStappenbaak.txt
;Format: Element,NAP value (m)<CRLF>
1,-1.50
2,-1.45

Lines starting with ";" are seen as comments.


Driver Information

DriverStappenbaak (RWS) Interface TypeSerial/UDP/TCP-IPDriver Class TypeCounted
UTC Driver (question)NoInput / OutputInputExecutableDrvStappenbaak.exe 
Related Systems
Related Pages




Interfacing Notes

Type of cable wiring (one-way or two-way).

DB-25

Sensor


DB-9

COM


DB-25

COM

Pin 2

RXD

-----

Pin 3

TXD


Pin 2

TXD

Pin 3

TXD

-----

Pin 2

RXD


Pin 3

RXD

Pin 7

SG

-----

Pin 5

SG


Pin 7

SG


Database Setup

Add an observation for the wave height. 

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.