Qinsy 9.4.1 - Resolved Bugs
Bug Fixes
Below you will find listings of bugs which have been reported in previous releases and which have been solved for the Qinsy 9.4.1 release.
The QPS Support and Test Departments are testing reported Qinsy cases with version 9.4.1 and newer versions.
Console
Setup
Summary | Affects Version/s | Priority |
---|---|---|
Setup - Database - DB printout - USBL Transducer alignment correction status incorrect | 9.2.1, 9.2.0 | |
Setup - Database - French translation of HADR is not correct | 9.3.0 | |
Setup - Database - Drivers - System Cloner should only allow (cloned) system selections of the same driver type | 9.3.1 | |
Setup - Database - Drivers - Force unique port number when adding a System Cloner driver | 9.3.1 |
Drivers
Summary | Affects Version/s | Priority |
---|---|---|
Drivers - MBES - Reson - 7125 SV2 - Snippets / Beam time series data not decoded | 9.3.0, 9.2.3, 9.1.0, Older Versions | |
9.3.1 | ||
Drivers - Miscellaneous - IMCA - Not possible to set Slot value in UPD version | 9.2.2 | |
Drivers - Output - Redundancy Monitor - Settings not visible | 9.3.1 | |
Drivers - Tide Guage - I/O Driver Editor - Tide station quality doesn't decode | 9.2.2, 8.18.6 |
Online
Summary | Affects Version/s | Priority |
---|---|---|
9.3.1 | ||
9.3.1 | ||
Online - Session Setup - Storage - Dynamic Surface - QPD Metadata settings are blocked | 9.1.0 | |
9.3.1, 9.3.0 | ||
Online - Session Setup - Storage - Small type error in the layers | 9.3.0 | |
Online - Time Synchronization Display - Not showing information | 9.4.0 | |
Online - Wrong position result when using NTF (paris) datum which has other meridian. | 9.3.1, 9.3.0 |
Displays
Summary | Affects Version/s | Priority |
---|---|---|
9.3.0 | ||
Displays - Alert - I/O Alert remains red even though data is present | 9.3.1, 9.3.0 | |
9.3.0, 9.2.3 | ||
Displays - Alert - SVP comparison - Observation not recognized first time | 9.3.0 | |
9.3.0 | ||
Displays - Generic - Tide - Closest and Second Tide Gauge only show raw value | 9.3.1 | |
Displays - Navigation - CPU load very high even when replay is finished | 8.18.3, 9.0.0, 9.3.1 | |
Displays - Navigation - Slow due to using QGFVOM in combination with many survey lines | 9.2.2 | |
Display - Navigation - Sounding grid on remote doesn't update continuously | 8.18.6, 9.2.3 | |
Displays - Profile - Active Main Line - Displayed in wrong location when line is reversed | 9.3.1 | |
9.3.0 | ||
9.3.1 |
Offline/Replay
Summary | Affects Version/s | Priority |
---|---|---|
Offline - Analyze - Contains old QPS logo | 9.3.1 | |
Replay - Batch replay - Node result is different when doing a batch replay instead of one by one | 9.3.1 | |
Offline - Export - Generic - QPD - Transducer Latitude format showing an E instead of N | 9.3.1, 8.18.3 | |
9.3.0, 9.2.2 |
Survey Manager
Since Qinsy 9.0.0 the Processing Manager (32bit) has changed into Survey Manager (64bit).
Bugs reported in the former Processing Manager (PM.NET) will mainly be fixed within the Survey Manager unless they are Critical/Blocker issues and were decided to be solved in QINSy 8.