Skip to main content
Skip table of contents

DCI SBU92 Tide Gauge (Snelpeil Data) - 22


Description

Driver to decode tide heights as transmitted by a DCI SBU92 Radio Tide Gauge, either in 'Snelpeilbericht' output format or 'Geselecteerde Data' output format.

'Snelpeilbericht' messages contain multiple channels (slots).
Some slots contain tide heights, while other slots contain wind speed or direction, or pressure.


Driver Information

DriverDCI SBU92 Tide Gauge (Selected Data)
DCI SBU92 Tide Gauge (Snelpeil Data) 
Interface TypeSerial Driver Class TypeCounted 
UTC Driver (question)NoInput / OutputInput ExecutableDrvDCISBU92.exe SEL
DrvDCISBU92.exe RAW 
Related Systems
Related Pages




Decoding Notes

Data is timetagged when the header of a data message is received, i.e. "[01" for 'Snelpeilbericht' format, or "$" for  'Geselecteerde Data' format.

Tide values are multiplied by 0.01 to convert from cm to meters.

'Snelpeilbericht' channel strings include a checksum character: 128 - ( sum six chars % 128 ). Example.

CheckSum "01+068" is 48+49+43+48+54+56 = 298%128 = 42-128 = -86; 86 = 'V'.


Drivers IO Notes

Command line parameter "RAW" will decode 'Snelpeilbericht' data messages and "SEL" will decode 'Geselecteerde Data' messages.

"NOCS" will not check the checksum in 'Snelpeilbericht' channels.


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.