Qinsy 9.0.0 - Bugs

Bug Fixes

For some of the bug fixes in 9.0.0 we also released a patch for 8.18.3 that can be downloaded from the 8.18.3 release notes on the Patch and Known Issues tab . These bug fixes are indicated with (8.18.3)

We had several reports (13-14 June 2019) that one of the programs QPDSynchronizer.exe was detected by Windows Defender to be a Trojan. Microsoft replied that this was a false positive and that the definitions for their anti virus software were updated. We want to thank those for their swift reporting, which helped to limit the impact of such a false positive.

Below you will find listings of bugs that have been reported in previous releases and have been solved for the Qinsy 9.0.0 release.
During the beta testing of Qinsy 9 and the Survey Manager bugs were reported by Beta testers, Support and the QPS Test Department and solved for Qinsy 9.0.0. those issues are not listed here

CONSOLE

Summary	Fix Version/s	P
Console - ENC Administrator - New installation pointing to wrong directory	9.0.0
Console - Generic Layout Editor - General Recording Status	9.0.0  (8.18.3)
Console - Generic Layout Editor - Issue with translation table since QINSy upgrade	9.0.0  (8.18.3)
Console - I/O Driver Editor - DrvInputSerial - 1 digit positive values, are translated as zero	9.0.0
Console - I/O Driver Editor - Not decoded field is only 1 character long	9.0.0
Console - License Manager - Squire not recognized via Softlock	9.0.0
Console - Project Upgrader - Detected as Trojan: Win32/Azden.!cl in QPDSynchronizer.exe	8.18.3 ,  8.18.4 ,  9.0.0
Console - Qimera - Starting Qimera incorrectly requires template DB.	9.0.0
Console - Remote Display Controller - Build Dates are different	9.0.0
Console - Tide Manager - Graph - Shows wrong time reference	9.0.0
Console - Tide Manager - UDP/Serial Stream - Time not decoded as UTC	9.0.0
Console - USBL Calibration - Freezes when loading databases	9.0.0

SETUP

Summary	Fix Version/s	P
Setup - Database - Object - Import Dredge Head Model in Survey Vessel object crash	9.0.0
Setup - Database - Object - Import - Vessel Shape - feet to meter conversion not working	9.0.0
Setup - Database - KMALL - Control setting is not used - Remove setting	9.0.0
Setup - Database - Geodetics - Changing output datum in db setup resets datum transformation parameters	9.0.0
Setup - Database - Geodetic - Pre-defined Coordinate system - Wrong UTM Zone chosen	9.0.0
Setup - Database - IMCA Generic and Anchor Spread Message - Multiple Anchor Spreads setup - Link to Barge is not made	9.0.0
Setup - Database - IMCA Generic and Anchor Spread Message - Multiple Anchor Spreads setup - Link to Barge is not made	9.0.0

DRIVERS

Summary	Fix Version/s	P
Drivers - AIS - Static data message 5 not used - Nav Display not all targets are shown in 8.18.2 vs 8.17	9.0.0  (8.18.3)
Drivers - Dredging - Dredge Status not working with Integers in 8.18.3	9.0.0
Drivers - GNSS - Septentrio SBF - Driver does not reconnect	9.0.0
Drivers - GNSS - Septentrio SBF - Reconnect should be faster	9.0.0
Drivers - Generic - Issue with parsing integer values between 0-9	9.0.0  (8.18.3)
Drivers - Generic Input - Ini files - Data not decoded because of space	9.0.0  (8.18.3)
Drivers - Gyro - AD Navigation DC-Series (Heading) - 05 heading decoding failed	8.18.4 ,  9.0.0
Drivers - INS - iXBlue - Std Bin - DVL is missing Vertical Speed	9.0.0
Drivers - INS - iXBlue - Std Bin - Positioning System Slot values limits interfacing to 1 INS per object	9.0.0
Drivers - INS - iXBlue Std Bin - Do not show GUI when now output in setup	9.0.0
Drivers - Laser - SICK LMS511 datas not decoded	9.0.0
Drivers - MBES - Kongsberg - Controller - ZDA/motion Interface RS-422/RS-232	9.0.0
Drivers - MBES - Kongsberg - KMALL - extra detection support	9.0.0
Drivers - MBES - PicoMBES - Data 180 degrees reversed	9.0.0
Drivers - Output - AutoPilot (with turning track) - remembers the incorrect settings after autopilot driver change	9.0.0
Drivers - Output - Autopilot - MavLink- Warning when closing QINSy controller	9.0.0
Drivers - Output - Generic - Recording Status Translator options	9.0.0
Drivers - Sidescan Sonar - EdgeTech 2205 - Start and stop commands for Discover software are failing	9.0.0
Drivers - Time Synchronization System - NTP - take long time before we use it	9.0.0

ONLINE

Summary	Fix Version/s	P
Online - Computation - Heights - Order change only possible when object is selected	9.0.0
Online - Display Manager - Pulldown Menu in Display Manager incomplete (German Version)	9.0.0
Online - DrvResultOut.exe - Crash in combination with softlock	9.0.0
Online - Echosounder Settings - SVP - Always on top not applied for Connect to Logger	9.0.0
Online - Echosounder Settings - SVP - UTC time not correctly used	9.0.0
Online - Echosounder Settings - SVP - reverting to a previous profile after a crash	9.0.0
Online - Session Setup - Dynamic surface with Multi channel sounder	8.18.4 ,  9.0.0
Online - Session Setup - Line Planning - C-MAP kernel qgfline Issue	9.0.0
Online - Session Setup - Storage - Sounding Grid always stores additional soundings	9.0.0
Online - Socket Server - Reports version difference for remote display clients from same MSI installation	9.0.0

DISPLAYS

There have been some issue with the Navigation Display not showing CAD files (Line Planning, Background) for UTM zones East of the Meridian. 

Summary	Fix Version/s	P
Displays - ADCP - Unit should update when global settings change	9.0.0
Displays - Alert - Alarm should show no data	9.0.0
Displays - Alert - Audible alarm doesn't work with multiple alerts	9.0.0
Displays - Alert - Computed height shouldn't be created	9.0.0
Displays - Alert - I/O alert Computed Height always active	9.0.0
Displays - Alert - Raw data alerts are using the last value when data drops out	9.0.0
Displays - Echosounder - Display non-responsive during and after online/replay	9.0.0
Displays - Navigation - ARPA Beacon display not stable (colors)	9.0.0
Displays - Navigation - Auto range for diff surface does not work	9.0.0
Displays - Navigation - CAD - Background - Unable to get data to appear online	9.0.0  (8.18.3)
Displays - Navigation - CAD - Background - not vissible on W10 machines	9.0.0  (8.18.3)
Displays - Navigation - CAD - Background and Linedata not visible UTM Zone 14	9.0.0  (8.18.3)
Displays - Navigation - CAD - Line Planning - Do not show in Nav Display	9.0.0  (8.18.3)
Displays - Navigation - CAD - Line Planning - Edit not working	9.0.0
Displays - Navigation - CAD - Line Planning - Range rings not shown survey unit	9.0.0
Displays - Navigation - CAD - Line Planning - Right click edit/activate line is not possible if qgfback is loaded	9.0.0
Displays - Navigation - CAD - QGF Line File is not shown	9.0.0
Displays - Navigation - ENC - Quality indicator is on by default	9.0.0
Displays - Navigation - Geodetic Utility - Last layer is created twice	9.0.0
Displays - Navigation - New computation not added in navigation display	9.0.0
Displays - Navigation - Range Marker Information - incorrect date settings of ETA	9.0.0
Displays - Navigation - Range Marker boxes are not autoscaled	9.0.0
Displays - Navigation - Sounding Grid - When a display set is copied, the sun illumination is not remembered.	9.0.0
Displays - Side Scan - Toolbars - Alignment - By default underneath each other in Replay	9.0.0
Displays - Sub Bottom - Changing time varied gain causes colormap overflow	9.0.0
Displays - Swath - Scan Print - Prints 1m off when working on decreasing KP	8.18.4 ,  9.0.0
Replay - Display - SSS - Template needed	9.0.0

OFFLINE/REPLAY

PROCESSING MANAGER → Survey Manager

Summary	Fix Version/s	P
PM.NET - UI - scaling issues	9.0.0
PM.NET - UI - File Menu - New - Adding a new Vertical Model is not available	9.0.0
PM.NET - Start Up - Crashes	9.0.0
PM.NET - Sounding grid - Only visible at startup after doing a refresh (F5)	9.0.0
PM.NET - Sounding grid - Crash - Using reference settings	9.0.0
PM.NET - Sounding Grid - Volumes - Memory allocation is not being released by PM.NET after volume calculation	9.0.0
PM.NET - Sounding Grid - Operators - Wrong grid operation dialog is shown	9.0.0
PM.NET - Sounding Grid - Operations - Sounding grid shows "-infinity" value after minimum operation	9.0.0
PM.NET - Sounding Grid - Operations - Infinite values created with layer operations	9.0.0
PM.NET - Sounding Grid - Interpolation - Digipol - Import still has an option to look for *.pro files	9.0.0
PM.NET - Sounding Grid - Import - Out of memory when importing a large grid.	9.0.0
PM.NET - Sounding Grid - Import - BAG - Crashes when using large files	9.0.0
PM.NET - Sounding Grid - Import - ASCII not all data imported	9.0.0 , 8.18.3 (new PM)
PM.NET - Sounding Grid - Import - ASCII - points files Crashes PM	9.0.0
PM.NET - Sounding Grid - Geographical Grid - Mean value doesn't update all the time	9.0.0
PM.NET - Sounding Grid - Export - Interpolated Cells does not work	9.0.0
PM.NET - Sounding Grid - Export - Grid to grid is not working	9.0.0
PM.NET - Sounding Grid - Export - Geotiffs - Difference layer causes black background	9.0.0
PM.NET - Sounding Grid - Export - Geotiffs - 32 bits RGB has black background (normal & with reference layer)	9.0.0
PM.NET - Sounding Grid - Export - GeoTiff fails	9.0.0
PM.NET - Sounding Grid - Export - GeoTiff - Editor crashes	9.0.0
PM.NET - Sounding Grid - Crashes when selecting empty grid + Autoscale	9.0.0
PM.NET - Sounding Grid - Contours and Soundings - Sometimes .QGFcont files are not created	9.0.0 , 8.18.3 (new PM)
PM.NET - Sounding Grid - Contours and Sounding - Contours outside grid coverage	9.0.0
PM.NET - Sounding Grid - Contours - Generator is not creating all contourlines	9.0.0
PM.NET - Sidescan - Sidescan Viewer - cannot handle a apostrophe in the folder name	9.0.0
PM.NET - Sidescan - Sidescan Viewer - Manually added Threshold value is not used	9.0.0
PM.NET - Sessions - Browse sessions is referring to old extension	9.0.0
PM.NET - QPD - Validator - Constant crashing of PM.net and very slow performance in Validator	9.0.0
PM.NET - QPD - Strange Object and Transducers tracks drawn in Plan View	9.0.0
PM.NET - QPD - Export - LAS/LAZ - After export Dynamic Surface updates	9.0.0
PM.NET - QPD - Export - LAS - Intensity in value not the correct	9.0.0
PM.NET - QPD - Export - ASCII - SZ - Multichannel Data does not work correctly	9.0.0
PM.NET - Profile View - Range tool can't be used with a white background color. No option to change color.	9.0.0
PM.NET - Plotting - Settings - Sample Sounding Grid disables itself	9.0.0
PM.NET - Plotting - Raster image - GeoTiffs or ECW not plotting on A2 or bigger	9.0.0
PM.NET - Plotting - Profiles - Crashes during plotting	9.0.0
PM.NET - Plotting - Print Preview Crashes	9.0.0
PM.NET - Plotting - PM crashes when closing the plot dialogue	9.0.0 , 8.18.3 (new PM)
PM.NET - Plotting - ENC - Over radar and under radar in properties are automatically turned on again	9.0.0
PM.NET - Plotting - Crash when no printers defined in Windows	9.0.0
PM.NET - Planview - Sounding Grid - Background is selectable as reference layer - Only allow QGFdes	9.0.0
PM.NET - Plan view - settings are not remembered in the	9.0.0
PM.NET - Plan View - ENC view, should be the same as in the Nav Display	9.0.0
PM.NET - Performance - Slow at opening files (extracting geometry)	9.0.0
PM.NET - File Management - Sounding Grid - Disabling layer does not always work	9.0.0
PM.NET - File Management - Session does save active layers	9.0.0
PM.NET - File Management - Dynamic Surface - Is always permanently removed from a project and disk	9.0.0
PM.NET - FM - Button not active with FM 8 installed	9.0.0
PM.NET - Dynamic Surface - Unable to import qpd files in an empty Dynamic Surface that was edited while empty	9.0.0
PM.NET - Dynamic Surface - Export - BAG - Difference between QINSy and Qimera	9.0.0
PM.NET - Dynamic Surface - CUBE - Not available without QLOUD Add-On	9.0.0
PM.NET - Dynamic Surface - Automatic update - Causes crash every few minutes	9.0.0
PM.NET - CAD - Vertical Offset Model - Creating a model from ASCII Lat Long file does not work	8.18.4 ,  9.0.0
PM.NET - CAD - Vertical Offset Model - ASCII Import - Apply scale factor not applied to format tester	9.0.0
PM.NET - CAD - Lineplanning - Lines - Not possible copy/paste from Excell	9.0.0
PM.NET - CAD - Line Planning - selecting/editing lines doesn't work as expected	9.0.0
PM.NET - CAD - Line Planning - qgfline file causes PM to crash after editing points	9.0.0
PM.NET - CAD - Line Planning - True heading not matching LDM & controller heading	9.0.0
PM.NET - CAD - Line Planning - Points - Radii do not take survey units into account (always in m)	9.0.0
PM.NET - CAD - Line Planning - Import - DXF -Failed	9.0.0
PM.NET - CAD - Line Planning - Height is NOT inherited when creating winglines or crosslines	9.0.0
PM.NET - CAD - Line Planning - Filtering on layer crashes PM64	9.0.0
PM.NET - CAD - Import - No warning message shown with failed import.	9.0.0
PM.NET - CAD - Import - Hidden screen prevents me from working with the PM.NET	9.0.0
PM.NET - CAD - Import - ASCII - Cannot remove first field	9.0.0
PM.NET - CAD - Export to KML not working	9.0.0
PM.NET - CAD - Background - Not able to change the layers	9.0.0
PM.NET - CAD - Background - Line Data Property causes crash	9.0.0
PM.NET - CAD - Background - Import - DWG refuses to import	9.0.0