Sonardyne Bundle Monitoring - 39
Description
This driver is used to decode the information received from the Sonardyne Bundle Monitoring system. The following input systems are supported: 'Bundle Gyro Compass', 'Bundle Depth Sensor' & 'Bundle Auxiliary Sensor'. These sensors may be located on the bundle itself or on the leading/trailing towheads.
Driver Information
Driver | Sonardyne Bundle Monitoring | Interface Type | Serial | Driver Class Type | Terminated |
|---|---|---|---|---|---|
No | Input / Output | Input | Executable | DrvQpsTerminated.exe SONARDYNE_BUNDLE | |
Related Systems |
| ||||
Related Pages | |||||
Decoding Notes
In order to add the link between the fields and the observation as defined in the Database Setup program slot numbers need to be entered. For these slot numbers the following convention is used:
Slot number | Description |
|---|---|
Dx | Depth value whereby x runs from 1 to 16 (for field 4 to 19) |
Hx | Heading value whereby x runs from 1 to 16 (for field 20 to 35) |
Ax | Analogue value whereby x runs from 1 to 16 (for field 20 to 35) |
KP | KP value as found in field 36 |
To decode the observations the following System types need to be defined in the Database Setup program:
Observation type | System type |
|---|---|
Transponder depth | Bundle Depth Sensor |
True heading | Bundle Gyro Compass |
Analogue measurement | Bundle Auxiliary Sensor |
KP value | Bundle Auxiliary Sensor |
Drivers IO Notes
The driver supports the following command line parameters:
Comm and line option | Description | Default |
NOCS | Disable checksum verification | Not used |
PPS/UTC | Enable usage of date&time field | Not used |