DM-0115
Description
Driver to decode wave height from Marine 300 stappenbaak.
There are two versions of the driver: the first (Stappenbaak (RWS)) will decode the electrode value and multiply it with 5 cm to get the NAP height. This driver assumes that the bottom of the "baak" is positioned at 0.00 NAP.
The second version (Stappenbaak (RWS, User NAP file)) will look up the decode electrode in a user defined file. The file should be called DrvStappenbaak.txt and should have the following format:
;Configuration file for RWS Stappenbaak
;Filename: DrvStappenbaak.txt
;Format: Element,NAP value (m)<CRLF>
1,-1.50
2,-1.45
Lines starting with ";" are seen as comments.
Driver Information
Driver | Stappenbaak (RWS) | Interface Type | Serial/UDP/TCP-IP | Driver Class Type | Counted |
|---|---|---|---|---|---|
No | Input / Output | Input | Executable | DrvStappenbaak.exe | |
Related Systems |
| ||||
Related Pages | |||||
Interfacing Notes
Type of cable wiring (one-way or two-way).
DB-25 | Sensor | DB-9 | COM | DB-25 | COM | ||
|---|---|---|---|---|---|---|---|
Pin 2 | RXD | ----- | Pin 3 | TXD | Pin 2 | TXD | |
Pin 3 | TXD | ----- | Pin 2 | RXD | Pin 3 | RXD | |
Pin 7 | SG | ----- | Pin 5 | SG | Pin 7 | SG |
Database Setup
Add an observation for the wave height.