Qinsy 9.5.4 - Resolved Bugs
Other pages
Resolved bugs
Below you will find listings of bugs which have been reported in previous releases and which have been solved for this Qinsy release.
Installation
Summary | Affected versions | Priority |
---|---|---|
Installation - Qinsy Knowledge Base - Does not check for Qinsy 9 installers | 9.5.1 | Low |
Console
Summary | Affected versions | Priority |
---|---|---|
Console - Geo Config - Vertical CRS - datum not extracted from recorded database | 9.4.0, 9.5.0 | High |
Console - Geo Config - Change naming of "time-dependent Helmert 7-parameters" | Qinsy 9.5.1, Qimera 2.5.0, Fledermaus 8.5.0 | Low |
Console - Geo Config - Test tool - Crash when opening due to QGFVOM as Geoidmodel | Fledermaus 8.5.1, Qinsy 9.5.3, Qimera 2.5.1 | Urgent |
Console - Remote Display Controller - Navigation Display - Autopilot track not visible | 9.4.5, 9.5.0 | High |
Console - Tide Monitor - Report - Page setup - Units based on computer regional settings | 9.5.2, 9.5.3 | High |
Setup
Summary | Affected versions | Priority |
---|---|---|
Setup - Drivers - MBES - Benthos C3D drivers missing the degree symbol | 9.5.2, 9.5.3 | Low |
Drivers
Summary | Affected versions | Priority |
---|---|---|
9.4.6, 9.5.1, 9.5.2 | High | |
Driver - Output - Autopilot - APB output - Bearing sometimes unnecessarily smoothed | 9.5.0, 9.5.1, 9.5.2 | High |
Drivers - Output - Autopilot - Difference between run-in and surveyline | 9.5.1 | Low |
Drivers - Output - Autopilot - First section starts with a bit of distance | 9.5.0, 9.5.1 | Low |
Drivers - SSS - C-Max - Not possible to select ranges in driver GUI | 9.4.4, 9.5.3 | High |
Online
Summary | Affected versions | Priority |
---|---|---|
Online - Survey log - Exception when clicking outside dialog | 9.5.2, 9.5.3 | High |
Displays
Summary | Affected versions | Priority |
---|---|---|
Displays - Generic - Attribute 1 and 2 are not shown for waypoints | 9.5.2, 9.5.3 | High |
Displays - Navigation - Changing point-color when they change from 'planned' to 'surveyed' | 9.5.2, 9.5.3 | High |
9.5.1 | Low | |
Displays - Navigation - Crashes when primary grid in Session Setup is removed | 9.5.2 | High |
Displays - Navigation - Slow when using a Waypoint/line for calculating a Autopilot track | 9.5.0, 9.5.2, 9.5.3 | High |
Display - Timeplot - Duplicate selectable systems after switching active computation | 9.5.2, 9.5.3 | Low |
Offline/Replay
Summary | Affected versions | Priority |
---|---|---|
Replay - Unnecessary backups of the database files are created | 9.5.3 | Urgent |
Survey Manager
Summary | Affected versions | Priority |
---|---|---|
Survey Manager - CAD - Area - Raster Generator results in crash | 9.5.3 | High |
Survey Manager - CAD - Export - "Add layers to an existing file" overwrites file | 9.5.1, 9.5.2 | High |
Survey Manager - CAD - Import / Export - Export QGF with blocks shows block layer in export wizard | 9.5.1 | High |
9.5.2 | High | |
Survey Manager - Plotting - Crash of Survey Manager during plotting | 9.5.2 | High |
Survey Manager - Profile - Crashes when adding one or multiple design files to existing profile | 9.5.0, 9.5.3 | High |
Survey Manager - Sounding Grid - Contours and Spotsounding - Naming Detail Level incorrect | 9.5.2, 9.5.3 | Low |
Survey Manager - Sounding Grid - Table from color map is inverted at import | 9.5.3 | High |
9.5.2 | High | |
9.5.3 | High |