Qinsy 9.6.1 - Resolved Bugs
Resolved bugs
Below you will find listings of bugs which have been reported in previous releases and which have been solved for this Qinsy release.
Installation
Summary | Affected versions | Priority |
|---|---|---|
Qinsy - Installer - Update link to the Geodetic Resources release notes | Qinsy 9.6.0 | Low |
Console
Summary | Affected versions | Priority |
|---|---|---|
Console - Geo Config - Crash when selecting transformation which uses source CRS that has not been updated yet | Qinsy 9.6.0, Qimera 2.6.0, Fledermaus 8.6.0 | Urgent |
Console - Geo Config - Linear unit change at Map Projection Setup dialog shows disabled OK button | Qinsy 9.6.0, Qimera 2.6.0, Fledermaus 8.6.0 | High |
Console - Geo Config - Map Projection Setup wrongly converts angular quantities to zero | Qinsy 9.6.0, Qimera 2.6.0, Fledermaus 8.6.0, Fledermaus 8.5.1, Qimera 2.5.1, Qinsy 9.5.3 | High |
Console - Geo Config - Still possible to create configuration with 2 datums and 0 datum shifts | 2012.05.06, Qinsy 9.6.0, Qimera 2.6.0, Fledermaus 8.6.0 | High |
Console - Geo Config - Vertical datum selection crashes the Console | Qinsy 9.6.0 | Urgent |
Console - Project Upgrader - QPD - Wrong message with "new" version of files | Qinsy 9.6.0 | Low |
Console - Tide Monitor - Incorrect predictions from observations due to time format | Qinsy 9.3.1, Qinsy 9.4.3, Qinsy 9.4.4, Qinsy 9.6.0, Qinsy 9.5.6 | High |
Console - Tide Monitor - Report - Type of time shown in report vs. main page is inconsistent | Qinsy 9.5.3, Qinsy 9.5.4 | High |
Console - Tide Monitor - Selecting a line in the table goes to the wrong time in the graph | Qinsy 9.5.3 | High |
Setup
Summary | Affected versions | Priority |
|---|---|---|
Setup - Clone Settings - Boat Variable
| Qinsy 9.6.0, Qinsy 9.5.5 | Low |
Setup - Database - Position Navigation System Wizard Page - Data output field (combobox) overlapping Latency editbox field | Qinsy 9.6.0 | Low |
Drivers
Summary | Affected versions | Priority |
|---|---|---|
Drivers - Generic Serial Output - Going online without valid COMport will degrade Controller behavior | Qinsy 9.6.0 | High |
Drivers - INS - iXblue std bin - Missing the option for redundancy based output in setup and not used online | Qinsy 9.6.0, Qinsy 9.5.5 | High |
Drivers - Laser - Intensity Z+F Profiler 9012 values are not correct in QPD-files
| Qinsy 9.5.0, Qinsy 9.6.0 | Urgent |
Online
Summary | Affected versions | Priority |
|---|---|---|
Online - Calibrations - Gyro and others - Comparison matrix not showing negative values | Qinsy 9.5.4, Qinsy 9.6.0 | Low |
Online - Computation - All computations fully expanded by default | Qinsy 9.5.3, Qinsy 9.6.0 | Low |
Online - Computation - Layback/USBL - Vector to secondary object is rotated - Related to Convergence | Qinsy 9.5.4, Qinsy 9.6.0, Qinsy 9.5.5 | Low |
Online - High Computation Age
| Qinsy 9.5.3 | Urgent |
Online - Reset Computations - Can not check/uncheck a listed computation | Qinsy 9.6.0 | Low |
Online - Session Setup - Bargetrack - Automatic created touchdown track (qgfline) is never visible in Navigation Display or Survey Manager | Qinsy 9.6.0 | High |
Online - Session Setup - Bargetrack - Memory leak in Preprocessor when Bargetrack is enabled | Qinsy 9.5.2 | High |
Online - Session Setup - Storage - Clearing the layers empty's layer drop down in Navigation display | Qinsy 9.6.0 | High |
Online - Session Setup - Storage - Not possible to set the sensitivity corridor after clearing grid layers | Qinsy 9.6.0 | High |
Online - Session Setup - Storage - Rename 'Sounding grid name' to 'Grid name' | Qinsy 9.6.0 | Low |
Online - Session Setup - Storage - Static Grid - Restore 'autodetect format' for importing ASCII | Qinsy 9.6.0 | High |
Displays
Summary | Affected versions | Priority |
|---|---|---|
Displays - Beta Navigation - Base Layer - Build-in Light / Dark don't show | Qinsy 9.6.0 | High |
Displays - 3D Point Cloud - QPS logo not shown by default. | Qinsy 9.6.0 | High |
Displays - Generic display - DTM - Grid - Recording layer info not updating | Qinsy 9.6.0 | High |
Displays - Navigation - Annotations icon only working at 32 bit color depth
| Qinsy 9.6.0, Qinsy 9.5.6 | Low |
Displays - Navigation - Crash when selecting 'Active Grid' as Reference Type when 'Data in Grid' is Range Mode | Qinsy 9.6.0 | High |
Displays - Navigation - Data seems shifted compared to Survey Manager
| Qinsy 9.0.0, Qinsy 9.5.0, Qinsy 9.5.3, Qinsy 9.6.0, Qinsy 9.5.5 | Urgent |
Displays - Navigation - Dyngrid (created in session setup) only selectable in newly created display | Qinsy 9.6.0 | Low |
Displays - Navigation - Geodetic Utility - Strange behavior with Mainline Offset | Qinsy 9.5.4, Qinsy 9.6.0 | High |
Displays - Navigation - Grid - Shade layer - Active Layer not updated when switching layers | Qinsy 9.6.0 | High |
Displays - Navigation - Pre plot shape - Slow and not responding | Qinsy 9.5.4 | High |
Displays - Navigation - Static Grid - Shade Layer not correct compared to Survey Manager | Qinsy 9.6.0 | Urgent |
Displays - Navigation - Unable to visualize GeoTIFFs in US feet | Qinsy 9.6.0 | High |
Displays - Navigation - View Properties - Wrong behavior selecting colors from combobox | Qinsy 9.4.4 | High |
Displays - Swath - Pipe Picking - KP value is from current steered node, should be from the Transducer | Qinsy 9.6.0 | High |
Displays - Swath - Pipe Picking Utility - Format 'Column based ASCII file' does not work | Qinsy 9.6.0 | Low |
Displays - Timeplot - Some colors not visible in Observation Settings dialog | Qinsy 9.5.4, Qinsy 9.6.0 | Low |
Survey Manager
Summary | Affected versions | Priority |
|---|---|---|
Survey Manager - CAD - Background data - Add line or polyline is available | Qinsy 9.6.0 | Low |
Survey Manager - CAD - Export - DXF - No warning when overwriting files | Qinsy 9.6.0 | Low |
Survey Manager - CAD - Import/Export - Complex shapefile not drawing correctly | Qinsy 9.5.4, Qinsy 9.6.0 | Low |
Survey Manager - CAD - Line Planning - Export - Small text labels and not possible to change them | Qinsy 9.4.3, Qinsy 9.6.0, Qinsy 9.5.5 | High |
Survey Manager - Dynamic Grid - Erase inside area no longer works | Qinsy 9.6.0 | Urgent |
Survey Manager - Dynamic Grid - Importing a dyngrid without xml file will import it as static grid | Qinsy 9.6.0 | Low |
Survey Manager - File Management - QGF - Layer- Change name not working | Qinsy 9.6.0 | High |
Survey Manager - Grid - Volumes - Advanced - Export - Column headers not correct when using Calculation mode Fill | Qinsy 9.6.0 | High |
Survey Manager - Grid - Volumes - Rename the layer type Sounding Grid to Grid | Qinsy 9.6.0 | High |
Survey Manager - Infinite loop when saving session without overwrite | Qinsy 9.6.0 | High |
Survey Manager - Plan view - Not possible to pan with mouse wheel when a Plot is selected | Qinsy 9.6.0 | Low |
Survey Manager - Plotting - Basic Text - DXF export - Text is in the 0 layer | Qinsy 9.6.0 | Low |
Survey Manager - Plotting - Color scale - Legend - Warning pop-up when removing text | Qinsy 9.6.0 | Low |
Survey Manager - Plotting - Delete PDF when 'Plot to PDF' is cancelled | Qinsy 9.6.0 | High |
Survey Manager - Plotting - Padding not correct at high values | Qinsy 9.6.0 | Low |
Survey Manager - Plotting - Scale Bar - unclear result | Qinsy 9.6.0 | High |
Survey Manager - Plotting - Template - Naming not unique | Qinsy 9.6.0 | Low |
Survey Manager - Plotting - Template - Naming not unique | Qinsy 9.6.0 | High |
Survey Manager - Plotting - The BasicText preview image in the Plot Data Preferences is incorrect | Qinsy 9.6.0 | High |
Survey Manager - Plotting - Unable to create a clone of a predefined plot template | Qinsy 9.6.0 | Low |
Survey Manager - Profile - No data on part of grid | Qinsy 9.5.3, Qinsy 9.6.0 | Low |
Survey Manager - Profile - Profile data on area where's there no data | Qinsy 9.6.0 | Urgent |
Survey Manager - QPD - Export - User defined ascii - does not work for multiple 'merged' QPD's | Qinsy 9.6.0, Qinsy 9.5.5, Qinsy 9.5.6 | High |
Survey Manager - QPD - Export - User defined ASCII - interval mode distance doesn't work | Qinsy 9.6.0, Qinsy 9.5.5 | High |
Survey Manager - QPD - Export - User defined ascii output broken on Settings File | Qinsy 9.5.3 | High |
Survey Manager - Raster - GeoTiff - Properties do not show CRS | Qinsy 9.6.0 | High |
Survey Manager - Sounding grid - Export - Incorrect GeoTiff shift | Qinsy 9.4.4, Qinsy 9.6.0 | High |
Survey Manager - Sounding Grid - Interpolate digipol - Time estimate bar incorrect | Qinsy 9.5.3, Qinsy 9.5.5 | Low |
Survey Manager - SoundingGrid - Export - ASCII - 3D Transformation not working | QINSy 8.18.5, Qinsy 9.2.0, Qinsy 9.2.1 | High |
Survey Manager - Static Grid - Export - Not possible to select Static Grid | Qinsy 9.6.0 | High |
Survey Manager - Static Grid - Import - Crash when Static grid too heavy | Qinsy 9.6.0 | Urgent |
Survey Manager - Static Grid - Import/Fill - Slow Operation | Qinsy 9.6.0 | High |
Survey Manager - Static Grid - Importing dynamic surface on static surface | Qinsy 9.6.0 | High |
Survey Manager - Static Grid - Volumes - Advanced - Crash when saving a setup containing "Current Selection" without selection | Qinsy 9.6.0 | High |
Survey Manager - Static Grid - Volumes - Advanced - Loading a different operation mode overwrites settings | Qinsy 9.6.0 | Low |
Survey Manager - Static Grid - Volumes - Advanced - No warning with big grids when only two layers are used and no design | Qinsy 9.6.0 | Low |
Survey Manager - Static Grid - Volumes - Advanced - Design offset not formatted correctly | Qinsy 9.6.0 | Low |
Survey Manager - WMS - Properties Window - URL and Legends not shown | Qinsy 9.6.0 | High |