Multibeam Calibration - Qimera Patch Test Mode (via Survey Manager)

For processing the patch test in Qimera Patch Test Tool, make sure Qimera is installed on your PC. With a Qinsy 9 license, you can use Qimera Patch test tool for free.
The tool will be launched from Survey Manager, so make sure QPD files have been created.

It is important that the calibration is performed in a certain order. The calibration must start with the roll calibration, then the pitch calibration and after that the heading calibration.
Qinsy uses the rotation matrix in this order for computing footprints.

1. Start the Survey Manager.
2. In the File Explorer select all QPD's (with a maximum of 10) used for the calibrations and click on Qimera Patch Test 

   

   .
3. The Qimera Patch Test Tool will now launch, then go to step 2 in the step-by-step guide below in order to process the patch test:

Images not visible in F1 Offline Help Qinsy

In the F1 Offline Help of Qinsy, the Qimera patch test images cannot be viewed, sorry for the inconvenience.

Please go to the Qimera Knowledge Base if you would like to see the images which go with the text.