Sub Item | Description | Value Type
| Properties |
---|
Name | Name of the current mainline. | text |
|
Type | "Point" if current mainline is a POINT, "Single Line" if current mainline is a LINE and "Route" if current mainline is a ROUTE. | text |
|
Description | When Parent Item Line is set to [Mainline], then this Line Description will be "Current Point", "Current Line", or "Current Route", dependent on the type of the current mainline. Otherwise it will be the user-defined description of the additional mainline, as entered by the user in the Controller Session Setup, Planning, Additional Mainlines. | text |
|
Line Index | A number between 1 and 10, indicating the selected Line of the Parent item property. So 1 means Parent Item is [Mainline], 2 means it is [2nd Mainline] and so on. | int |
|
SOL Easting | Depends on the type of the selected mainline: - POINT
Value will be easting co-ordinate of the Point - LINE
Value will be the start-of-line easting co-ordinate of the Line - ROUTE
Value will be the start-of-line easting co-ordinate of the very first section of the Route.
| int |
|
SOL Northing | Depends on the type of the selected mainline: - POINT
Value will be northing co-ordinate of the Point - LINE
Value will be the start-of-line northing co-ordinate of the Line - ROUTE
Value will be the start-of-line northing co-ordinate of the very first section of the Route.
| int |
|
EOL Easting | Depends on the type of the selected mainline: - POINT
Value will be easting co-ordinate of the Point. So it is the same as the SOL Easting - LINE
Value will be the end-of-line easting co-ordinate of the Line - ROUTE
Value will be the end-of-line easting co-ordinate for the very last section of the Route.
| int |
|
EOL Northing | Depends on the type of the selected mainline: - POINT
Value will be northing co-ordinate of the Point. So it is the same as the SOL Northing - LINE
Value will be the end-of-line northing co-ordinate of the Line - ROUTE
Value will be the end-of-line northing co-ordinate for the very last section of the Route.
| int |
|
SOL Latitude | Depends on the type of the selected mainline: - POINT
Value will be latitude co-ordinate of the Point - LINE
Value will be the start-of-line latitude of the Line - ROUTE
Value will be the start-of-line latitude for the very first section of the Route
| int | Datum - Survey Datum (Default)
- WGS84
|
SOL Longitude | Depends on the type of the selected mainline: - POINT
Value will be longitude co-ordinate of the Point - LINE
Value will be the start-of-line longitude of the Line - ROUTE
Value will be the start-of-line longitude for the very first section of the Route.
| int | Datum - Survey Datum (Default)
- WGS84
|
EOL Latitude | Depends on the type of the selected mainline: - POINT
Value will be latitude co-ordinate of the Point. So it is the same as the SOL Latitude - LINE
Value will be the end-of-line latitude of the Line - ROUTE
Value will be the end-of-line latitude for the very last section of the Route.
| int | Datum- Survey Datum (Default)
- WGS84
|
EOL Longitude | Depends on the type of the selected mainline: - POINT
Value will be longitude co-ordinate of the Point. So it is the same as the SOL Longitude - LINE
Value will be the end-of-line longitude of the Line - ROUTE
Value will be the end-of-line longitude for the very last section of the Route.
| int | Datum- Survey Datum (Default)
- WGS84
|
Length | Depends on the type of the selected mainline: - POINT
Value will be empty - LINE
Value will be the length of the entire Line Value will be empty when the line is curved i.c.w the reference set to True - ROUTE
Value will be the length of the entire Route Value will be empty when at least one of the sections is curved i.c.w the reference set to True.
| int | Reference |
SOL Bearing | Depends on the type of the selected mainline: - POINT
Value will empty - LINE
Value will be the bearing between the SOL co-ordinate and the EOL co-ordinate of the Line. A possible radius value (i.e. curved line) is not taken into account. - ROUTE
Value will be the bearing between the SOL co-ordinate and the EOL co-ordinate of the Route. Possible curved sections are not taken into account.
| int | Reference |
Radius | Depends on the type of the selected mainline: - POINT
Value will be the Radius1 value (in survey units) that defines a possible circle around the point. - LINE
The values that defines the curve for the line. A straight line has a radius of zero, a +tive radius means the line bends to starboard, and -tive means it bends to port. - ROUTE
Value will be the radius value for the current section of the current Steered Node (as defined in the Controller). A straight section has a radius of zero, a +tive radius means the line bends to starboard, and -tive means it bends to port.
| int |
|
Current Section | The current (i.e. closest) section index for the selected mainline as calculated by the Controller for the Steered Node. When the selected mainline is a POINT it will be 0 (zero), and always 1 when the selected mainline is a LINE. If the steered node position is before SOL for a ROUTE, it will be 1. If the steered node position is after EOL for a ROUTE, it will be the index of the last section (same as the number of sections). | int |
|