Fix Info

return

Most Fix Information is not available for Export, except for the Fix Number and the Fix Time.

Main Item	Description	Value Type	Properties
Fix Info Comment	User defined text	text	Text Format: Normal Text Your own free plain text Binary Enter one or more ASCII character codes, comma or space separated, in the range between 1 and 127. For example '2' for a binary STX character, '3' for a binary ETX character, or '13, 10' for CR+LF. See table ASCII Codes for an overview of all possible characters. New Line Same as Binary, but already formatted as '13, 10' (meaning CR+LF) and without a possible Field Delimiter. A Field Delimiter may be present when your layout purpose is for Export or ASCII Logging.
Fix Number	Current fix number (same number as seen in the Controller's view) Will be empty if the fix status is not yet valid	int
Fix Time	Time of the fix (when it was generated). It is this time that will be used, when your triggering output/update/log/export mode is set to Fix Based. Will be empty if the fix status is not yet valid	time
Fix Status	Will be empty if the fix status is not yet valid, or when not on-line. Otherwise, three possible values can be expected: "Waiting" When no fix has been received yet. "Normal" When a normal fix has been received. "No trigger" When no trigger is received from the gun controller. This status will only occur when the event mode (under Session Setup, Fixing) is set to "Distance Preload".	text
Fix Time Interval	The calculated time, in seconds, between two fix events. Will be empty if the fix status is not yet valid, or when not on-line	double
Fix Distance Interval	The calculated distance between two fix events. Will be empty if the fix status is not yet valid, or when not on-line	double
Next Fix Number	Number of the next fix event. Will be empty when not on-line	int
Time To Next Fix	The predicted remaining time, in seconds, to the next fix event. Will be empty when not on-line	timespan
Distance To Next Fix	The predicted remaining distance to the next fix event. Will be empty when not on-line	double

Text Format: